Buffer kit for up to 16 IP cameras, 16P+2G PoE switch

Buffer kit for up to 16 IP cameras, in ABOX-H indoor housing (space for 2x 18Ah batteries + NVR), 144 W power supply (2x 72 W), 18-port PoE switch (16xPoE 10/100Mbps + 2xGigabit Uplink), electronic fuses.

Key features and functions:

• 4K Ultra HD camera support
• buffer power supply for 16 PoE 802.3af/at or PASSIVE receivers
• electronic fuse for each PoE channel (auto-reset)
• PoE can be disabled on selected ports
• clear LED indication of power and data transmission status
• up to 40W of power on PoE ports (LAN_1 to LAN_8)
• quick and easy setup with no configuration required
• high efficiency of the power supply module (90%)
• two supply voltage options are available: 12 VDC and 48 VDC
• easy and quick installation service thanks to modular design
• easy expansion and scaling of the system by adding additional xPoE / IP and IPB / IPUPS series switches
• installation of modules in any perforated part of the enclosure (hole pattern system)
• space for two 18 Ah batteries
• space for a network video recorder (NVR)
• possibility of storing excess cables inside the enclosure
• cable entry points at the rear of the enclosure
• distance to the wall/mounting surface

The kit includes:

1x ABOX-H enclosure

2x AUPS-70-120-OF power supply

2x ASUC-100-480-OF DC/DC converter

2x xPoE-10-20-OF PoE switch

Notes:

• batteries not included
• maximum dimensions of the recorder mounted inside the enclosure: 390 x 390 x 60 mm
• the photo with the NVR recorder shows an example configuration of devices in the ABOX-H enclosure

IPUPS-16-20-H is a ready-to-use kit designed to provide buffered power for an IP CCTV system with 16 IP cameras. Electronic protection on the PoE outputs ensures continuous operation of the system in the event of a short circuit or overload on individual power channels, and automatically restores voltage once the fault is cleared. The device is used in systems requiring increased network bandwidth, such as 4K Ultra HD CCTV monitoring.

Buffered PoE switch kits are intended for use with IP cameras and other network devices supporting PoE 802.3af/at or PASSIVE PoE.

Connecting appropriate batteries ensures uninterrupted operation of the power system during temporary mains power outages.

ABOX series indoor enclosures provide a convenient solution for the aesthetic installation of devices and termination of cabling inside buildings. All enclosures are made of powder-coated steel sheet finished in semi-matt white. Production using a modern technological line ensures the highest quality and precision of workmanship. Each enclosure is equipped with a screw lock, removable door, and door tamper switch.

The available models feature dedicated perforation with a 10.8 mm hole pattern, compatible with the mounting hole spacing of installation modules. This system solution enables vertical or horizontal installation of selected devices in any perforated section of the enclosure.

Example application of the IPUPS-16-20-H kit to power a recorder along with 16 PoE IP cameras.