Kit for 5 IP cameras, PoE switch 5P+1UP

Kit for up to 5 IP cameras, 6-port 10/100Mbps PoE switch (5xPoE + 1xUplink) in ABOX-S4 outdoor enclosure, PoE over 4 pairs, integrated 55 V 90 W power supply.

IPB-5-10A-S4 is designed as a universal PoE network switch dedicated to IP CCTV systems.

By integrating the power supply directly into the switch, most of the installation only involves connecting UTP cables and 230 VAC mains power.

Practical IP55 enclosure simplifies installation in locations where a classic desktop switch cannot be used, while also providing protection against weather conditions, allowing for outdoor installation.

The high output power (90 W), high output voltage (55 VDC), and PoE over all four UTP pairs enable the device to power high-demand receivers, such as PTZ cameras or multiple PoE extenders from the xPoE or APT series.

Thanks to the high PoE port power of the IPB and the higher PoE voltage, it is possible to build extensive installations or add additional branches using APT/xPoE series extenders.

At the same time, the IPB-5-10A-S4 is a convenient PoE source for 2WIRE and XCOAX converters. With good quality cables, it is possible to connect several IP cameras over single coaxial cable or twisted pair cable.

Key features and functions:

• quick and easy setup with no configuration required
• capable of powering 5 PoE receivers (802.3af/at or PASSIVE)
• up to 40 W of power per PoE port (total power budget of 90 W)
• high efficiency of the integrated power supply (>90%)
• PoE can be disabled on selected ports
• clear LED indication of power and data transmission status
• electronic fuse for each PoE channel (auto-reset)
• additional screw terminal block enabling the use of 55 VDC voltage
• easy system expansion and scaling by adding additional APT/xPoE switches and IP/IPUPS kits
• compact size
• possibility of storing excess cables inside the enclosure
• cable entry through rubber plugs mounted in the enclosure: 2x29mm
• possibility to insert cables with pre-installed connectors (after cutting the rubber plug)
• includes a power cable and 2 brackets for mounting the enclosure without affecting the IP55 protection rating

NOTE: The ABOX-S4 enclosure is specifically designed for this product and is not available for sale separately.

Electronic PoE output protection ensures continuous operation of the entire system in the event of a short circuit or overload on a single PoE port, and automatic voltage restoration after the failure has been resolved.

It is also possible to purchase the IPB module in an ABOX-M2 enclosure. The symbol for this product is IPB-5-10A-M2. It has a higher degree of protection (IP56), larger dimensions, and cable glands instead of rubber plugs.

Additionally, the IPB module is available without an enclosure for customized installations, under the designation IPB-5-10A-OF.

High-quality plastic provides resistance to UV radiation and other harsh weather conditions.

IPB-5-10A-S4 is designed to work with IP cameras and other network devices powered by the PoE 802.3af/at and PoE PASSIVE standards.