Midspan PoE Passive 55V 70W, 1 channel 10/100/1000Mbps

IPMP-70-550 is used to power PoE-compliant devices in LAN networks. Placed between a switch that does not have PoE power (or does not have a sufficient power budget) and network devices (e.g. cameras, access points, extenders), it enables simultaneous power and data transmission to PoE IP devices using a single UTP cable at 10/100/1000Mbps.

Power over Ethernet (PoE) is an easy-to-install, fast and cost-effective solution for powering network products. There is no need to replace existing Ethernet switches and cabling.

It provides power using both data pairs in UTP (1/2 and 3/6) and after free pairs (4/5 and 7/8).

This allows maximum use to be made of the available cabling and powering of demanding receivers.

In combination with the APT series, it enables us to create extensive installations in a tree topology using only UTP cables without 230VAC power supply.

Key features and functions:

• support for PoE receivers with high power consumption
• the perfect power source for cascaded APT and xPoE series extenders
• designed for 10/100/1000 Mbps networks
• high efficiency 95%
• support for Passive PoE receivers
• port security

Note:

The unit is supplied with 230V mains voltage and does not offer buffer power backup. A power cable is included in the scope of supply. The unit is rated for continuous operation at 70W with proper cooling during operation. It does not have an on/off switch, so adequate protection must be provided and the user must be instructed on how to switch off.

Example use of IPMP-70-550 as power supply for xPoE-6-11-S2 switch via UTP cables

Example use of IPMP-70-550 with APT-5-50 switch to power 4 PoE IP cameras

Example application of IPMP-70-550 to power a PoE line with cascaded APT series switches to power 7 PoE IP cameras